Grader CASE 836C AWD

CASE 836C AWD

Price: €195,500 net

Year of manufacture: 2024

Operating hours: ONLY 18 hours

Weight: 12,800 kg

6-cylinder engine with an output of 119 kW

MANUFACTURER’S WARRANTY: 12 MONTHS OR 2,000 OPERATING HOURS

Technical specifications for the CASE 836C (AWD) motor grader

Drivetrain:

NEF diesel engine, 6-cylinder, type FPT F67 NEF STAGE V, common rail, turbocharged with intercooler, 6.7 L displacement; complies with the latest Stage V emission standards; features the patented "Hi-eSCR2" selective catalytic reduction system using AdBlue.

Power in gears 1–3: 102 kW (138 hp) per ISO 14396/ECE R120 standards.

Power in gears 4–6: 115 kW (156 hp) per ISO 14396/ECE R120 standards.

Torque: 725 Nm at 1,400 rpm.

Full PowerShift transmission, allowing for gear changes under load.

Forward gears: 6 (max. speed = 39.9 km/h).

Reverse gears: 3 (max. speed = 29.2 km/h).

Torque converter with a 1.87:1 ratio.

Tractive force: 85 kN.

Hydraulic system:

▪ Variable-displacement multi-piston pump, max. flow rate 94.5 l/min;

▪ A closed-circuit "load sensing" system with a pressure of 200 bar ensures high operational precision;

▪ System capacity – 185 l;

Drive system – all-wheel drive:

Hydrostatic front-wheel drive with an E.D.C.V. (Electronic Drive Control Volume) system, which supplements the hydrodynamic rear-wheel drive. A bi-directional pump controls the motors located in the front wheel hubs. A "No-Spin" hydraulic differential regulates torque and prevents wheel slippage. A microprocessor monitors and adjusts the drive force distribution between the front and rear wheels. A stepless control allows the operator to adjust the front-wheel tractive effort to suit current operating conditions. A "creep" mode is included as standard, utilizing only the front-wheel drive to maintain very low travel speeds.

▪ Hydraulically operated steering system;

▪ Turning radius (measured at the outer edge of the wheels) – 6.6 m;

▪ Six equal-sized wheels with 405/70 R20 tires;

▪ Wet-disc braking system acting on the four rear wheels;

▪ Driven front axle (6WD):

▪ Hydrostatic front-wheel drive, managed by an electronic system (EDCV) that regulates rotational speed; Axle oscillation – ± 15°;

Wheel tilt – ± 21.45°; Steering angle (left/right) – ± 40°; Frame articulation – ± 28°; Ground clearance – 0.485 m;

▪ Tandem rear axle:

Axle oscillation – ± 15°;

Automatic "No-Spin" differential lock;

4-wheel drive transmission via chains;

Circle (blade rotation assembly):

▪ 360° rotation capability;

▪ Circle diameter – 1.15 m;

▪ Enclosed circle assembly with internal lubrication for the rotation bearing, preventing the ingress of contaminants;

Electrical system and cab:

▪ 24 V voltage;

▪ 90 A alternator;

▪ 2 x 100 Ah batteries;

▪ "Cold start" system to facilitate engine starting in low temperatures;

▪ Spacious, comfortable ROPS/FOPS-certified cab equipped with air conditioning, work lights, an adjustable steering column, a comfortable fully adjustable operator seat, and doors on both sides;

Operating parameters:

▪ Rear-mounted ripper;

Ripper width – 2.0 m;

Working depth – 0.361 m;

▪ Front blade (parallel lift);

Width – 2.35 m;

Height – 0.765 m;

Ground clearance under the blade – 0.509 m;

Working depth – 0.136 m;

▪ Center blade (moldboard); Width – 3.355 m;

Height – 0.526 m;

Working depth – 0.456 m;

Ground clearance under the blade – 0.394 m;

Tilt angle – 49.5°;

Shift to the left – 0.708 m;

Shift to the right – 0.491 m;

Reach to the left (without frame articulation) – 1.525 m;

Reach to the right (without frame articulation) – 1.865 m;

Reach to the left (with frame articulation) – 2.15 m;

Reach to the right (with frame articulation) – 2.49 m;

Lift angle to the left – 76°;

Lift angle to the right – 117°;

▪ Operating weight – 12,800 kg;

▪ Height – 3.24 m;

▪ Max. length – 8.961 m;

▪ Width – 2.36 m (across tires); Additional equipment included in the machine price:

▪ Heated FOPS/ROPS cab with air conditioning,

▪ Comfortable, heated, air-suspended operator seat,

▪ All-wheel drive (AWD) 6x6,

▪ Front parallel blade,

▪ Mid-mounted blade (3355 mm wide, 522 mm high) with float function,

▪ 5-shank rear ripper,

▪ Reversing alarm,

▪ Road lighting for public road use,

▪ LED work lights,

▪ Amber warning beacon,

▪ Reversing camera.

Price: €195,500 net